ステーターヤマハ Vmax 1200 VMX1200 90-07 3UF-81410-00-00 3UF-81410-10-00 に適合
ステーターヤマハ Vmax 1200 VMX1200 90-07 3UF-81410-00-00 3UF-81410-10-00 に適合
ステーターヤマハ Vmax 1200 VMX1200 90-07 3UF-81410-00-00 3UF-81410-10-00 に適合

ステーターヤマハ Vmax 1200 VMX1200 90-07 3UF-81410-00-00 3UF-81410-10-00 に適合

販売価格¥7,305 JPY
SKU: M550-A227
量:

仕様:
状態: アフターマーケット 100% 新品
数量: 1 個
タイプ: 発電機ステーター コイル

寸法:
内部直径 : 54 mm / 2.12in
外径 : 115 mm / 4.52in
厚さ : 13 mm / 0.51in

Stator Fit for Yamaha Vmax 1200 VMX1200 90-07 3UF-81410-00-00 3UF-81410-10-00



その他仕様:
芯数:3
ピン数:3
プラグ数:1
固定穴数: 3

交換部品番号:
3UF-81410-00
3UF-81410-10

適合品:
ヤマハ VMAX1200 V-MAX (JP) 1990-1999 に適合
ヤマハ VMX1200 1988-2007 に適合

(互換性チャートは参考のみです!!!)
(故障したユニットと比較してください)および適合品を決定するために提供された画像)


特徴:
元のユニットに直接交換
プラグアンドプレイ、直接フィット、簡単な取り付け。
最高級のラミネート素材
最高級銅巻線、摂氏 200 度までの耐性があります。
コネクタが含まれています。
出荷されるすべての製品はテストされています。

パッケージ内容:
発電機ステーター コイル 1 個

注意:
新しいステータを取り付ける前に

ステータの AC 出力を確認してください。
ステータおよびレギュレータ/整流器の焼けたり腐食したコネクタは交換してください
溶けた配線を確認して修理します。
すべてのコネクタに高温誘電グリースを使用してください。
当社のステータは、オリジナルとは異なるワイヤのカラー コードを使用している場合があります。
すべてのワイヤは正しい順序で取り付けられています。配線構成は変更しないでください。
このステータは直接プラグイン交換品として設計されており、そのまま使用する必要があります。
ステータをボルトで固定するときは、必ずロック剤を使用してください。
当社のステータの場合は、ピックアップ コイルが含まれています。取り付けの際は必ずエア ギャップが正しいことを確認してください。

すべての商品写真は正確です。疑問がある場合は、当社の商品をオリジナルの部品と比較することを躊躇しないでください。

送料:
送料無料
商品の所在地: カリフォルニア州ロサンゼルスの倉庫
納期: 3 ~ 7 営業日

保証:
1.状態: 100% 新品
2.保証期間:1年
3. 24 時間サポート: タイムリーなアフターサポートを提供します


Customer Reviews

Based on 161 reviews
93%
(149)
6%
(9)
2%
(3)
0%
(0)
0%
(0)
A
Anonymous
Perfect

My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue

A
Anonymous
Great fitment

The battery is charging while the engine is on, so that solved my problem perfectly.

A
Anonymous
Thanks

After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.

A
Anonymous
💯satisfied

Works great! No more dead batteries!

G
Gurkirat Brar
Worked like a Charm and Fit like a Glove !

Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !

A
Anonymous
good replacement

Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.

A
Anonymous
Best place for oem parts

It works great i think I've had it for over a week bow and its working good no issues at all easy install

A
Anonymous
Bravo!

Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.

当社の顧客