2008-2014 ホンダ CBR600RR 2007-2014 CBR1000RR 点火スイッチ燃料ガスキャップロックセット

Had to go with this set since the options for a CBR600RR skip 2007 for some reason. Got the set in a timely manner and went ahead to install them. The gas tank only has 3 bolts holding it down and 5 more for looks (I'm guessing). All are M5, but the 3 new bolts to hold down the tank were M6. I opted to keep the original bolts so they were not two different sizes. Keys worked on all the locks. When I connected the ignition switch to the wiring harness and turned the switch, it did not turn the bike on. It was spotty on if it would make a good connection. After troubleshooting more, it turns out the male spade connector is about half as thick as the OEM. To make sure it would maintain a good connection, I cut the new connection off and soldered on the old one that had the OEM thickness. I'm happy it all works now, but was not completely satisfied with the issues I encountered.

The cap and the ignition are good, and the size are also perfect match.

This set worked flawlessly and was super easy to install, all plug and play in very happy with my order!

Ignition was a perfect fit, also came with the resistor built in it. Gas cap and trunk fit perfect too!

i would purchase from this vendor again im extremely happy with my purchase and it came earlier then expected by a couple weeks.

Well worth the money and worked exelent for stock replacement. I did not have to modify anything. Product hooked right up and worked perfectly. Will definitely use again if need be

Easy to install - works and looks great