Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000
Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000

Stator de générateur avec joint pour 200 XC 2008 50330040000 50330040100 54839204000

Prix ​​de vente€66,78 EUR
UGS : M550-C208
Quantité:

Stator de bobine magnétique + joint de générateur pour 200 XC 2008 - 54839204000 50330040000 50330040100

Caractéristiques :
Fabriqué en matériau magnétiquement conducteur de haute qualité pour minimiser les pertes magnétiques.
Enroulement informatisé pour optimiser la qualité de câblage en cuivre
Composants électriques de qualité supérieure.
Améliore considérablement la fiabilité et la durabilité par rapport aux unités d'origine.
Les fils conducteurs de la meilleure qualité avec isolation apportent à la fois une meilleure résistance à l'abrasion et à la chaleur.
Dissipateur thermique et charge améliorés capacités.
Remplacement direct de votre unité d'origine.
Plug-and-play, ajustement direct, les instructions ne sont PAS incluses.

Spécifications :
Condition : marché secondaire 100 % neuf
Type : Stator + joint

Numéro de pièce de rechange :
Ensemble de stator : 54839204000
Joint, couvercle du générateur : 50330040000, 50330040100

Montage :
Convient pour 200 XC 2008

(Le tableau de compatibilité est pour référence UNIQUEMENT !!!)
(Veuillez comparer avec votre unité défectueuse et l'image que nous avons fournie pour décider de la compatibilité)

Le forfait comprend :
1 x Stator Bobine
1 x joint de générateur

Remarque :
Avant d'installer votre nouveau redresseur régulateur de stator ;

Vérifiez la sortie CA du stator.
Remplacez tous les connecteurs brûlés ou corrodés. sur le stator et le régulateur/redresseur.
Vérifiez et réparez tout câblage fondu.
Utilisez de la graisse diélectrique haute température sur tous les connecteurs.
Notre stator/régulateur peut utiliser un code de couleur de fil différent de celui d'origine.
Tous les fils sont installés dans le bon ordre ; veuillez ne modifier aucune des configurations de câblage.
Ce stator est conçu comme un remplacement direct par plug-in et doit être utilisé comme tel.
Lors du boulonnage du stator, utilisez toujours un composé de verrouillage.
Si notre stator comprend une bobine de captage, assurez-vous toujours que l'entrefer est correct lors de l'installation.

Vous obtiendrez exactement ce que vous voyez sur les images, en cas de doute, n'hésitez pas à comparer notre article à votre pièce d'origine.

Expédition :
Livraison gratuite
Délai de traitement? : expédition sous 24 heures
Délai de livraison : 3-7 jours ouvrés

Garantie :
1. État : 100 % neuf
2. Période de garantie : 1 an
3. Assistance 24 heures sur 24 : vous fournir une assistance après-vente en temps opportun



Customer Reviews

Based on 153 reviews
92%
(141)
6%
(9)
2%
(3)
0%
(0)
0%
(0)
M
Markus
Lichtmaschine +Regler+Dichtung

Alles passte bis auf das ,das Kabel des Reglers zu kurz war, habe es aber mit dem originalen einfach verlängert! Sonst Top für diesen Preis 👍

A
Anonymous
Perfect

My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue

d
domenico speranza

Everything is fine thank you

J
Jason P
Almost perfect

Part came in looking like the original and had plenty of wiring loom to make it from A to Z. I left the electrical box open so I could check for spark before putting it all back together, hit the start button and nothing, engine didnt even turn over so I started retracing my steps and found that the ground wires on the new stator had come out of their mounting eyelit because it was never crimped. No big deal, took a few minutes to fix and make a solid connection and then she turned over and I had spark. I will be taking it out on the water in the next 2 weeks to make sure all is running good.

A
Anonymous
Parts were correct and excellent condition.

Im not going to lie, I was skeptical about ordering this stator and flywheel but I ordered it Saturday morning and I received it Monday afternoon and parts were exactly what I needed and go my bike up and running and I'm super grateful. I was to excited to install them and I forgot to take a picture of the new stator and flywheel.

A
Angelo Testino

Everything was perfect!

K
Ki Walters
Just one problem

Part worked great and it had good quality. Only problem we ran into was that the stator wire was about 2 inches short. Splicing some in to extend it worked but it was a bit annoying.

S
Sebastian Tank
Funktioniert

Kabel vom Stator war zu kurz und musste verlängert werden.

Fünf Sterne für den Preis und die Funktionalität und maßhaltigkeit.