Générateur de Stator pour Yamaha XVS650 v-star 650 Drag Star 650 personnalisé 98-06 XVS400 via fedex
Générateur de Stator pour Yamaha XVS650 v-star 650 Drag Star 650 personnalisé 98-06 XVS400 via fedex
Générateur de Stator pour Yamaha XVS650 v-star 650 Drag Star 650 personnalisé 98-06 XVS400 via fedex

Générateur de Stator pour Yamaha XVS650 v-star 650 Drag Star 650 personnalisé 98-06 XVS400 via fedex

Prix ​​de vente€49,78 EUR
UGS : M550-A037
Quantité:

SPÉCIFICATIONS :

Condition : pièces de rechange 100 % neuves

Quantité : 1 pièce

Type : bobine de stator de générateur


Dimensions :

Diamètre intérieur : 54 mm / 2,12"

Diamètre extérieur : 115 mm / 4,52"

Épaisseur : 13 mm / 0,52"




Autres spécifications :

Nombre de fils : 3

Nombre de broches : 3

Nombre de fiches : 1

Nombre de trous de fixation : 6


FITMENT :

Pour Yamaha XV400 (VIRAGO)1991-1994

Pour Yamaha XV500 1992-1998

Pour Yamaha XV535 (VIRAGO)1987-2001

Pour Yamaha XVS400 (DRAG STAR)1996-2008

Pour Yamaha XVS400C (DRAG STAR) CLASSIQUE) 1998-2008

Pour Yamaha XVS650 (V-STAR/ DRAG STAR)1997-2002

Pour Yamaha XVS650 (V-STAR CUSTOM/DRAG STAR CUSTOM)1998-2006

CARACTÉRISTIQUES :

Remplacement direct de votre unité d'origine

Plug-and-play, ajustement direct, installation facile.

Stratification de la plus haute qualité matériaux.

Enroulements en cuivre de la plus haute qualité, résistants à 200 degrés Celsius.

Bobine de pulsar de ramassage NON incluse.

Connecteur inclus.

Tous les produits expédiés sont testés.

Instructions d'installation NON incluses.


EMBALLAGE INCLUS :

1x bobine de stator de générateur


AVIS :

Avant d'installer votre nouveau stator


Vérifiez la sortie CA du stator.

Remplacez tout connecteur brûlé ou corrodé sur stator et régulateur/redresseur.

Vérifiez et réparez tout câblage fondu.

Utilisez de la graisse diélectrique haute température sur tous les connecteurs

Notre stator peut utiliser un code de couleur de fil différent de celui votre original.

Tous les fils sont installés dans le bon ordre ; veuillez ne modifier aucune des configurations de câblage.

Ce stator est conçu pour un remplacement direct enfichable et doit être utilisé comme tel.

Lors du boulonnage du stator, utilisez toujours un composé de verrouillage.

Si notre stator comprend une bobine de détection, assurez-vous toujours que l'entrefer est correct lors de l'installation.


Toutes les images des articles sont exactes ; en cas de doute, n'hésitez pas à comparer notre article à votre pièce d'origine.

Expédition :
Livraison gratuite
Délai de traitement : Expédié sous 24 heures
Délai de livraison : 3 à 7 jours ouvrables

Garantie :
1. État : 100 % neuf
2. Période de garantie : 1 an
3. Assistance 24 heures sur 24 : vous offre une assistance après-vente en temps opportun


Customer Reviews

Based on 153 reviews
92%
(141)
6%
(9)
2%
(3)
0%
(0)
0%
(0)
M
Markus
Lichtmaschine +Regler+Dichtung

Alles passte bis auf das ,das Kabel des Reglers zu kurz war, habe es aber mit dem originalen einfach verlängert! Sonst Top für diesen Preis 👍

A
Anonymous
Perfect

My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue

d
domenico speranza

Everything is fine thank you

J
Jason P
Almost perfect

Part came in looking like the original and had plenty of wiring loom to make it from A to Z. I left the electrical box open so I could check for spark before putting it all back together, hit the start button and nothing, engine didnt even turn over so I started retracing my steps and found that the ground wires on the new stator had come out of their mounting eyelit because it was never crimped. No big deal, took a few minutes to fix and make a solid connection and then she turned over and I had spark. I will be taking it out on the water in the next 2 weeks to make sure all is running good.

A
Anonymous
Parts were correct and excellent condition.

Im not going to lie, I was skeptical about ordering this stator and flywheel but I ordered it Saturday morning and I received it Monday afternoon and parts were exactly what I needed and go my bike up and running and I'm super grateful. I was to excited to install them and I forgot to take a picture of the new stator and flywheel.

A
Angelo Testino

Everything was perfect!

K
Ki Walters
Just one problem

Part worked great and it had good quality. Only problem we ran into was that the stator wire was about 2 inches short. Splicing some in to extend it worked but it was a bit annoying.

S
Sebastian Tank
Funktioniert

Kabel vom Stator war zu kurz und musste verlängert werden.

Fünf Sterne für den Preis und die Funktionalität und maßhaltigkeit.