2012-2019 Piaggio Liberty Fly 125 150 4T 3V ie Stator Generator B016543
Quantity:
Choose options
Quantity:
Generator Stator Magneto Fit for Piaggio Vespa LX 125 150 LX125 LX150 LXV S 2012-2016
Features:
Direct replacement to your original unit
Highest grade lamination materials.
Pick up pulsar coil included.
Connector included.
Rubber grommet included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator Coil
other specifications:
Number of wires: 6
Number of plugs: 2
Number of pins: 6
Number of poles: 12
Interior diameter: 32 mm
Exterior diameter: 84 mm
Please compare the number of pins and plugs with the old part before purchasing.
Replacement Part Number:
B016543
(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)
Fits Make/Model/Year:
Fit for Piaggio Fly 125 4T 3V ie 2012-2016
Fit for Piaggio Fly 150 3V ie 2013-2019
Fit for Piaggio Liberty 125 4T 3V ie 2013-2015
Fit for Piaggio Liberty 150 4T 3V ie 2013-2015
Fit for Vespa LX 125 4T 3V ie 2012-2016
Fit for Vespa LX 150 3V ie 2012-2013
Fit for Vespa S 125 ie 3V 2012-2013
Fit for Vespa S 150 3V ie 2012-2014
Please check and comfirm the number of stator poles is the same as ours and if your connectors and harness looks like the one in the photo before purchasing.
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Stator Generator
(The product contains all that can be seen in the picture.)
NOTICE:
Adjusting the grommet - Cables can be pulled through the grommet one at a time, some lubrication should help with this.
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
Features:
Direct replacement to your original unit
Highest grade lamination materials.
Pick up pulsar coil included.
Connector included.
Rubber grommet included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator Coil
other specifications:
Number of wires: 6
Number of plugs: 2
Number of pins: 6
Number of poles: 12
Interior diameter: 32 mm
Exterior diameter: 84 mm
Please compare the number of pins and plugs with the old part before purchasing.
Replacement Part Number:
B016543
(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)
Fits Make/Model/Year:
Fit for Piaggio Fly 125 4T 3V ie 2012-2016
Fit for Piaggio Fly 150 3V ie 2013-2019
Fit for Piaggio Liberty 125 4T 3V ie 2013-2015
Fit for Piaggio Liberty 150 4T 3V ie 2013-2015
Fit for Vespa LX 125 4T 3V ie 2012-2016
Fit for Vespa LX 150 3V ie 2012-2013
Fit for Vespa S 125 ie 3V 2012-2013
Fit for Vespa S 150 3V ie 2012-2014
Please check and comfirm the number of stator poles is the same as ours and if your connectors and harness looks like the one in the photo before purchasing.
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Stator Generator
(The product contains all that can be seen in the picture.)
NOTICE:
Adjusting the grommet - Cables can be pulled through the grommet one at a time, some lubrication should help with this.
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.