Pick-Up Coil Sensor for Husqvarna FC TC TX TE 250 350 2011-2018 55139004000
Choose options
?
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 17.6mm
Length: 26mm
Width: 22mm
Bracket center to center: 33.7mm
Other Specifications:
Number of wires: 2
PART NUMBER(S):
59039034000
81239034044
Fitments:
Fits 125 XCW 2017-2018
Fits 150 XCW 2017-2019
Fits 200 XCW 2008-2016
Fits 200 EXC 2013-2016
Fits 250 XC 2008-2016
Fits 250 XCW 2008-2016
Fits 250 XC USA AND EU MIX 2008-2016
Fits 250R Freeride 2014-2017
Fits 250 EXC 2008-2016
Fits 250 EXC SIX DAYS 2008-2016
Fits 250 EXC FACTORY 2011/2015
Fits 250 EXC FACTORY EDITION 2011/2015
Fits 250 XCF 2011-2015
Fits 350 XCF 2011-2015
Fits 250 SXF 2012-2015
Fits 350 SXF 2011-2015
Fits 350 SX-F CAIROLI REPLICA 2012
Fits 350 SX-F CAIROLI REPLICA 2011
Fits 300 2009-2016
Fits 300 XC 2008-2016
Fits 300 XCW 2008-2016
Fits 300 XCW SIX DAYS 2014-2016
Fits 300 EXC-E 2007-2008
Fits 300 EXC-E SIX DAYS 2008/2010-2011
Fits 300 EXC 2009-2016
Fits 300 EXC SIX DAYS 2009/2012-2016
Fits 300 EXC FACTORY EDITION 2011/2015
Fits Husqvarna FC250 2014-2015
Fits Husqvarna FC350 2014-2015
Fits Husqvarna FC 350 HQV 2014
Fits Husqvarna FC 250 HQV 2014
Fits Husqvarna TC 250 2014
Fits Husqvarna TX125 2017-2018
Fits Husqvarna TE150 2017-2018
Fits Husqvarna TE250 2011-2016
Fits Husqvarna TE300 2011-2016
Fits Husaberg TE250 2011-2013
Fits Husaberg TE300 2012-2013
Fits Suzuki RMZ250 2014-2017
Fits Suzuki RMZ450 2013-2018
Fits Suzuki RMZ250 2010-2013
Fits Suzuki RMZ450 2008-2012
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Package Included:
1x Pick up pulsar coil
NOTICE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
SEARCH YOUR DREAM FAIRING
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
