2008-2014 Honda CBR600RR 2007-2014 CBR1000RR Sada zámků spínače zapalování paliva a plynu

Had to go with this set since the options for a CBR600RR skip 2007 for some reason. Got the set in a timely manner and went ahead to install them. The gas tank only has 3 bolts holding it down and 5 more for looks (I'm guessing). All are M5, but the 3 new bolts to hold down the tank were M6. I opted to keep the original bolts so they were not two different sizes. Keys worked on all the locks. When I connected the ignition switch to the wiring harness and turned the switch, it did not turn the bike on. It was spotty on if it would make a good connection. After troubleshooting more, it turns out the male spade connector is about half as thick as the OEM. To make sure it would maintain a good connection, I cut the new connection off and soldered on the old one that had the OEM thickness. I'm happy it all works now, but was not completely satisfied with the issues I encountered.

The cap and the ignition are good, and the size are also perfect match.

Ignition was a perfect fit, also came with the resistor built in it. Gas cap and trunk fit perfect too!

i would purchase from this vendor again im extremely happy with my purchase and it came earlier then expected by a couple weeks.

Well worth the money and worked exelent for stock replacement. I did not have to modify anything. Product hooked right up and worked perfectly. Will definitely use again if need be

Easy to install - works and looks great