Kawasaki Magneto Generator Engine Stator Coil 21003-1135 Fit For Kawasaki KLF185 Bayou 185 1985-1988
Choose options
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 x Generator Stator Coil
Type: Generator Stator Coil
Dimensions :
Interior diameter : 33 mm / 1.30in
Exterior diameter : 87 mm / 3.44in
Thickness : 21 mm / 0.83in
Other Specifications :
Number of wires : 4
Number of pins : 4
Number of plugs : 2
Number of fixation holes: 3
Replacement Part Number: 21003-1134 ; 21003-1135
Fitments: For Kawasaki KLF185 Bayou 185 1985-1988
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
SEARCH YOUR DREAM FAIRING
Customer Reviews
Las medidas físicas son perfectas, las medidas eléctricas no son exactas pero funciona perfectamente.
Looks good
Nice long wires
Will try it
https://t.me/Honda_XR600/597
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
