Magneto Stator + Voltage Rectifier + Gasket For Yamaha YFM350 Bruin 350 04-14 Generic FedEx Express Shipping
Choose options
SEARCH YOUR DREAM FAIRING
Features:
Made of high grade magnetically conductive material to minimize the magnetic losses.
Computerized winding to optimize quality of copper wiring
Higher grade of electric components.
Dramatically improves reliability and durability comparing to stock units.
Best quality lead wires with insulation bring both enhanced abrasion and heat resistant.
Rectifier made of highest quality electro-conducting lamination materials.
Improved heat sink and charging capabilities.
Direct replacement to your original unit.
Plug-and-play, direct fit, instruction is NOT Included.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator + Regulator + Gasket
Replacement Part Number:
Stator Assy: 5UH-81410-00
Rectifier, regulator: 5GT-81960-00
Gasket, generator cover: 5UH-15451-00
Please confirm the?Replacement Part Number before ordering.
Fitment:
Fit for Yamaha YFM350BA Bruin 350 2WD 2004-2006
Fit for Yamaha YFM350FA Bruin 350 4WD 2004-2009
Fit for Yamaha YFM350FWA Bruin 350 4WD 2004-2014
Fit for Yamaha YFM350FAH Bruin 350 4WD Hunter 2005-2006
Fit for Yamaha YFM350A Grizzly 350 2WD 2007-2017
Fit for Yamaha YFM350FWA Grizzly 350 4WD 2007-2016
Fit for Yamaha YFM350FWAN Grizzly 350 4WD 2007-2011
Fit for Yamaha YFM350FWAN Grizzly 350 4WD Hunter 2007
Fit for Yamaha YFM350FWA Grizzly 350 4WD IRS Hunting 2007-2011
Fit for Yamaha YFM350 YFM35FGI Kodiak 350 2011
Fit for Yamaha YFM350 YFM35FAD Kodiak 350 2007-2010
Fit for Yamaha YFM350 YFM35FAD Kodiak 350 Hunter 2008
Fit for Yamaha YFM350 YFM35FGIH Kodiak 350 Hunter 2011
Fit for Yamaha YFM350 YFM35FADH Kodiak 350 Hunter 2009-2010
Fit for Yamaha YFM350X Wolverine 350 2WD 2006-2009
Package Includes:
1 x Stator Coil
1 x Regulator Rectifier
1 x Generator Gasket
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
