15/20 Amp Stator Fit for Kohler 237878-S 54 755 09S 41-403-09S 41 085 05
Choose options
Interior diameter : 70 mm / 2.77in
Exterior diameter : 140 mm / 5.54in
Thickness : 16 mm /0.64in
Other Specifications :
Number of wires : 2
Number of pins : 2
237878-S
234859
237329
237330
237331
237399
237716
4108507
4708501
4708511
5475509-S
A-237329
055-489
Fitments:
For Kohler CH11-CH15
For Kohler CH18-CH25
For Kohler CV11-CV15
For Kohler CV18-CV22
For Kohler K181
For Kohler K241
For Kohler K301-K341
For John Deere KT17 Kohler Engine
For John Deere KT19 Kohler Engine
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
All products shipped are tested
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
SEARCH YOUR DREAM FAIRING
Customer Reviews
Las medidas físicas son perfectas, las medidas eléctricas no son exactas pero funciona perfectamente.
Looks good
Nice long wires
Will try it
https://t.me/Honda_XR600/597
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
