Magneto Generator Engine Stator Coil Fit For Suzuki Intruder 700 VS700GLP GL VS700GLF GL VS700GLEP GLE 1986-1987
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quantity: 1x Generator Stator Coil
Type: Generator Stator Coil
Dimensions :
Interior diameter : 54 mm / 2.12 inches
Exterior diameter : 115 mm / 4.53 inches
Pole's Thickness : 28.5 mm / 1.12 inches
Pole's Width : 14.3 mm / 0.56 inches
Other specifications :
Number of wires: 7
Number of pins: 7
Number of plugs: 4
Number of fixation holes: 6(+2)
Number of poles: 18
PART NUMBER(S): 32101-38A00
FITMENT:
Fits Suzuki Intruder 700 VS700GLEF GLE 1986-1987
Fits Suzuki Intruder 700 VS700GLEP GLE 1986-1987
Fits Suzuki Intruder 700 VS700GLF GL 1986-1987
Fits Suzuki Intruder 700 VS700GLP GL 1986-1987
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsars coil included.
Connector included.
All products shipped are tested.
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
あなたのユニークなフェアリングを探してください
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
Everything is fine thank you
Part came in looking like the original and had plenty of wiring loom to make it from A to Z. I left the electrical box open so I could check for spark before putting it all back together, hit the start button and nothing, engine didnt even turn over so I started retracing my steps and found that the ground wires on the new stator had come out of their mounting eyelit because it was never crimped. No big deal, took a few minutes to fix and make a solid connection and then she turned over and I had spark. I will be taking it out on the water in the next 2 weeks to make sure all is running good.
Im not going to lie, I was skeptical about ordering this stator and flywheel but I ordered it Saturday morning and I received it Monday afternoon and parts were exactly what I needed and go my bike up and running and I'm super grateful. I was to excited to install them and I forgot to take a picture of the new stator and flywheel.
Everything was perfect!
Part worked great and it had good quality. Only problem we ran into was that the stator wire was about 2 inches short. Splicing some in to extend it worked but it was a bit annoying.
Kabel vom Stator war zu kurz und musste verlängert werden.
Fünf Sterne für den Preis und die Funktionalität und maßhaltigkeit.
Excellent