STATOR GENERATOR ALTERNATOR for Arctic Cat Wildcat Sport Trail 700 1000 XT 14-18
Choose options
SEARCH YOUR DREAM FAIRING
Fitment:
Fits Arctic Cat Wildcat Sport 1000 2015-2017
Fits Arctic Cat Wildcat Sport XT 1000 2015-2017
Fits Arctic Cat Wildcat Trail 1000 2014-2017
Fits Arctic Cat Wildcat Trail XT 1000 2014-2017
Fits Arctic Cat Bearcat 3000 LT 2016-2017
Fits Arctic Cat ZR3000 LXR 129 2017
Fits Arctic Cat ZR3000 EFI F/C 2018
Fits Arctic Cat Norseman 3000 F/C EFI 2018
Fits Arctic Cat Pantera 3000 2016-2018
Fits Textron Wildcat Sport 700 2018
Fits Textron Wildcat Trail 700 2018x
Replacement Part Number:
3307-028
Please confirm the?Replacement Part Number before ordering.
Dimensions:
Interior diameter : 53.8mm / 2.12 inches
Exterior diameter : 125.9mm / 4.95 inches
Pole's Thickness : 29.3mm / 1.15 inches
Pole's Width : 16mm / 0.63 inches
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Other specifications:
Number of wires: 5
Number of pins: 5
Number of plugs: 2
Number of fixation holes: 5(+2)
Number of poles: 18
Package Incleded:
1x Generator Stator Coil
Notice:
Before installing your new stator:
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
