17 Amp Single Phase Stator Generator For Sportster XL883 XL1200 91-06 29967-89C
Choose options
SEARCH YOUR DREAM FAIRING
Single Phase Generator Stator Fit for Sportster 883 1200 XL883L XL883R XL1200C XL1200R 1991-2005
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
Rubber grommet included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Stator Coil
other specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2
Number of poles: 12
Replacement Part Number:
29967-89C
Fits Model/Year:
Fit for SPORTSTER 1200 XL1200 1CAP 1991-2003
Fit for SPORTSTER 1200 CUSTOM XL1200C 1CGP 1996-2005
Fit for SPORTSTER 1200 ROADSTER XL1200R 1CLP 2004-2005
Fit for SPORTSTER 1200 SPORT XL1200S 1CHP 1996-2003
Fit for SPORTSTER 883 XL883 4CAM 1991-2005
Fit for SPORTSTER 883 CUSTOM XL883C 4CJM 1998-2005
Fit for SPORTSTER 883 DELUXE XL883DLX 4CFM 1991-1995
Fit for SPORTSTER 883 HUGGER XL883HUG 4CEM 1991-2003
Fit for SPORTSTER XL883 LOW XL883L 4CMM 2005
Fit for SPORTSTER 883R XL883R 4CKM 2002-2003/2005
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Stator Generator
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
