250 300 EXC XC TE 2007-2019 55139004000 55139004100 Stator Generator
Choose options
SEARCH YOUR DREAM FAIRING
Fitment:
Fits 125 XCW 2017-2018
Fits 150 XCW 2017-2019
Fits 200 XCW 2008-2016
Fits 200 EXC 2013-2016
Fits 250 XC 2008-2016
Fits 250 XCW 2008-2016
Fits 250 XC USA AND EU MIX 2008-2016
Fits 250R Freeride 2014-2017
Fits 250 EXC 2008-2016
Fits 250 EXC SIX DAYS 2008-2016
Fits 250 EXC FACTORY 2011/2015
Fits 250 EXC FACTORY EDITION 2011/2015
Fits 300 2009-2016
Fits 300 XC 2008-2016
Fits 300 XCW 2008-2016
Fits 300 XCW SIX DAYS 2014-2016
Fits 300 EXC-E 2007-2008
Fits 300 EXC-E SIX DAYS 2008/2010-2011
Fits 300 EXC 2009-2016
Fits 300 EXC SIX DAYS 2009/2012-2016
Fits 300 EXC FACTORY EDITION 2011/2015
Fits Husqvarna TC 250 2014
Fits Husqvarna TX125 2017-2018
Fits Husqvarna TE150 2017-2018
Fits Husqvarna TE250 2011-2016
Fits Husqvarna TE300 2011-2016
Fits Husaberg TE250 2011-2013
Fits Husaberg TE300 2012-2013
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
?
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper winding, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1PC
Type: Generator Stator Coil
Replacement Part Number:
55139004000
55139004100
Please confirm the?Replacement Part Number before ordering.
Dimensions:
Interior diameter : 29 mm / 1.14 inches
Exterior diameter : 84 mm / 3.31 inches
Pole's Thickness : 28.1 mm / 1.10 inches
Pole's Width : 21.4 mm / 0.84 inches
Other specifications:
Number of wires: 6
Number of pins: 6
Number of plugs: 3
Number of fixation holes: 2
Number of poles: 8
Package Incleded:
1 x Generator Stator Coil
Notice:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
