Stator Pick-up Pulsar Coil Fit for Kawasaki ER EX EN 500 ZL ZX 600 Ninja ZR-7 S
Choose options
SEARCH YOUR DREAM FAIRING
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 18.8mm
Length: 26.4mm
Width: 20.8mm
Bracket center to center: 35mm
Other Specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2
PART NUMBERS:
59026-1141
59026-1105
Fitments:
Fit for Kawasaki EN500 Vulcan 500 LTD 1996-2009
Fit for Kawasaki ER500 ER-5 1997-2005
Fit for Kawasaki BJ250 Estrella RS 1996
Fit for Kawasaki EX500 Ninja 500 D1-D12 1994-2005
Fit for Kawasaki EX500 GPZ500S D1-D2 1994-1995
Fit for Kawasaki EX500 E1-E9 1994-2002
Fit for Kawasaki EX500 Ninja 500R D6-D7 2006-2007
Fit for Kawasaki KLE400 1991-1999
Fit for Kawasaki KLE500 1991-2007
Fit for Kawasaki ZG1000 GTR1000 1994-2006
Fit for Kawasaki ZL600 Eliminator 1995
Fit for Kawasaki ZR550 Zephyr 550 1991-1997
Fit for Kawasaki ZR750 Zephyr 1995-1997
Fit for Kawasaki ZR750 ZR-7 1999-2003
Fit for Kawasaki ZR750 ZR-7S 2001-2003
Fit for Kawasaki ZX600 GPX600R 1993-1995
Fit for Kawasaki ZX600 Ninja 600R C8 C9 1995-1996
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Package Included:
1x Pick up pulsar coil
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
