Generator Stator Regulator & Gasket For Honda CRF450R CRF450 RX Enduro 2017-2019
Choose options
SEARCH YOUR DREAM FAIRING
Features:
Kit include Stator, Regulator Rectifier and gasket.
OEM quality, direct replacement to your original unit.
Perfect fit and ready to install.
Always use a sealant to mount the cable gland joint.
Instruction is NOT included.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit
Replacement Part Number:
Stator Assy: 31120-MKE-A01, 31120-MKE-A71
Rectifier, regulator: 31600-KZL-931
Gasket, generator cover: 11395-K95-A21
Fits Models:
Fit for Honda CRF450R - 2017 - CRF450RH
Fit for Honda CRF450RX - 2017 - CRF450RXH
Fit for Honda CRF450RX Enduro - 2017 - CRF450RXH
Fit for Honda CRF450R - 2018 - CRF450RJ
Fit for Honda CRF450RX - 2018 - CRF450RXJ
Fit for Honda CRF450RX Enduro - 2018 - CRF450RXJ
Fit for Honda CRF450RWE - 2019- CRF450RWEK
Fit for Honda CRF450R - 2019 - CRF450RK
Fit for Honda CRF450R - 2020 - CRF450RK (Argentina)
Fit for Honda CRF450R - 2021 - CRF450RK (Argentina)
(Only fits 2020-2021 CRF450RK (Argentina) model, that will NOT fit if your bike's 2020 CRF450RL or 2021 CRF450RM, check the part number before you purchase.)
Package Includes:
1 x Stator Coil
1 x Regulator Rectifier
1 x Generator Gasket
Notice:
One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator in no time.
Therefore we highly recommend you to switch both parts.
Technically modified stators are excluded from exchange.
This regulator is not suitable for lithium-ion batteries! The battery or other electric parts can be damaged!
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
