Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014
Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014
Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014
Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014
Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014

Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014

Sale priceCHF 84.00
Quantity:


SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil

Dimensions :
Interior diameter : 41 mm / 1.64"
Exterior diameter : 107 mm / 4.22"
Thickness : 18 mm /0.72"

Generator Stator Coil 31120-HN2-A21 For Honda TRX500 Foreman Rubicon 500 01-2014



OEM Replacement Part Number: 31120-HN2-A21,31120-HN2-003

Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5

FITMENT:
For Honda TRX500 Foreman Hydrostatic 500 2001-2010
For Honda TRX500 Rubicon 500 2014
For Honda TRX500 Foreman Rubicon 500 2001-2004
For Honda TRX500 Foreman Rubicon 500 GPScape 2004-2008
For Honda TRX500 Fourtrax Foreman Rubicon FA 2001-2009/2011-2014
For Honda TRX500 Fourtrax Foreman Rubicon FGA 2004-2008
For Honda TRX500 Fourtrax Foreman Rubicon FPA 2009/2012-2014

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
All products shipped are tested

PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days

Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support


Customer Reviews

Based on 172 reviews
92%
(159)
6%
(10)
2%
(3)
0%
(0)
0%
(0)
A
Anonymous
Perfect

My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue

A
Anonymous
Great fitment

The battery is charging while the engine is on, so that solved my problem perfectly.

A
Anonymous
Thanks

After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.

A
Anonymous
💯satisfied

Works great! No more dead batteries!

M
Matthew
Worked like a Charm and Fit like a Glove !

Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !

A
Anonymous
good replacement

Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.

A
Anonymous
Best place for oem parts

It works great i think I've had it for over a week bow and its working good no issues at all easy install

A
Anonymous
Bravo!

Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.

OUR CUSTOMERS