Coil-Pulsing For Kawasaki Mule 3000 3010 3020 4000 4010 59026-2065 59026-0559
Choose options
SEARCH YOUR DREAM FAIRING
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 18mm
Length: 26.5mm
Width: 21.5mm
Bracket center to center: 29mm
Other Specifications:
Number of wires: 2
Number of plugs: 1
Replacement Part Number:
59026-2065
59026-0559
Please confirm the?Replacement Part Number before ordering.
Fitments:
Fit for Kawasaki KAF620 Mule 3000 2001-2008
Fit for Kawasaki KAF620 Mule 4000 2009-2018
Fit for Kawasaki KAF620 Mule 3020 Turf 2001-2003
Fit for Kawasaki KAF620 Mule 3010 4X4 2001-2008
Fit for Kawasaki KAF620 Mule 4010 4X4 2009-2018
Fit for Kawasaki KAF620 Mule 4010 4X4 SE 2016-2018
Fit for Kawasaki KAF620 Mule 3010 Trans 4X4 2005-2008
Fit for Kawasaki KAF620 Mule 4010 Trans 4X4 2009-2010
Fit for Kawasaki KAF620 Mule 4010 Trans 4X4 SE 2016-2018
Fit for Kawasaki KAF620 Mule 4010 Trans 4X4 Camo 2014-2017
Fit for Kawasaki KAF620 Mule 4010 Trans 4X4 Realtree APG HD 2009-2013
Fit for Kawasaki KAF620 Mule 3010 4X4 Advanrage Classic 2003
Fit for Kawasaki KAF620 Mule 3010 Trans 4X4 Hardwoods Green HD 2005-2008
Fit for Kawasaki KAF620 Mule 4010 4X4 Hardwoods Green HD 2009
Fit for Kawasaki KAF620 Mule 3010 4X4 Hardwoods Green HD 2004-2008
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Package Included:
1x Pick up pulsar coil
Note:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
