CHARGING COIL w/PULSER For YAMAHA C25 C30 25-30Hp 01-12 2T OUTBOARD 69P-85541-09
Choose options
SEARCH YOUR DREAM FAIRING
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Charging Coil
Replacement Part Number:
69P-85541-09
61N-85543-09
61N-85543-19
Please confirm the?Replacement Part Number before ordering.
Fitments:
Fit for Yamaha 25HP 25B MHS 2010
Fit for Yamaha 25HP 25B M/W/HCS 2010
Fit for Yamaha 25HP 25B WHS/L 2001-2010
Fit for Yamaha 25HP 25B MHS/L 2001-2010
Fit for Yamaha 30HP 30H MHS/L 2001-2012
Fit for Yamaha 30HP 30H WL 2012
Fit for Yamaha 30HP 30H WCL 2012
Fit for Yamaha 30HP 30H MHS 2010
Fit for Yamaha 30HP 30H MHS/L 2010
Fit for Yamaha 30HP 30H MH/WCS 2010
Fit for Yamaha 30HP 30H W/MHS/L 2010
Fit for Yamaha 30HP 30H WCS 2010/2012
Fit for Yamaha 30HP E30H MHS/L 2003
Fit for Yamaha 30HP 30H WHS/L 2002/2006-2012
Fit for Yamaha 30HP 30H WCS/L 2001/2010/2012
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Package Included:
1x Charging Coil with Pulsers
Notice:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 3-7 working days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
The battery is charging while the engine is on, so that solved my problem perfectly.
After upgrade the stator and regulator, the battery stays charged, the lights remain bright, and the ignition system operates correctly. As same as get a new bike.
Works great! No more dead batteries!
Perfect fit and fired right up ! Let’s see if it holds up as longer than last OEM one !
Corrected the overcharging issue with my bike. Required a change over of the factory charging electrical connector. Only took a few minutes but was worth the savings.
It works great i think I've had it for over a week bow and its working good no issues at all easy install
Good product. Real pain in the butt to get the old one off to replace but product lined right up and fixed my charging issue.
