Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066
Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066

Bobine d'impulsion pour Kawasaki GPz 400 500 Ninja EX500 Vulcan 400 454 LTD 59026-1066

Prix ​​de vente€18,78 EUR
UGS : M550-B043
Quantité:

Numéro de pièce de rechange :
59026-1066
Veuillez confirmer le?Numéro de pièce de rechange avant de commander.

Compatibilités :Convient pour Kawasaki EN400 EN400 Twin 1989
Convient pour Kawasaki EN400 Vulcan 400 1990-1993
Convient pour Kawasaki EN450 Vulcan 454LTD 1985-1990
Convient pour Kawasaki EN500 Vulcan 500 A1-A6 1990-1996
Convient pour Kawasaki EX400 GPZ400S 1988-1990
Convient pour Kawasaki EX500 Ninja 1987-1993
Convient pour Kawasaki EX500 GPZ500S 1988-1993
Convient pour Kawasaki EX500 GPZ500 1987-1993
(Tableau de compatibilité est pour référence UNIQUEMENT !!!)
(Veuillez comparer avec votre unité défectueuse et l'image que nous avons fournie pour décider des compatibilités)

Dimensions :
Hauteur : 19 mm
Longueur : 25,9 mm
Largeur : 20 mm
Support centre à centre : 50 mm

Caractéristiques :
Nouvelle bobine de micro/pulsar pour réparer votre stator.
Remplacement direct de votre unité d'origine.
Plug-and-play, ajustement direct, installation facile.
Souvent indisponible auprès du fabricant OEM.
Tous les produits expédiés sont testés.

Spécifications :
Condition : marché secondaire 100 % neuf
Quantité : 1 pièce
Type : bobine de pulsar de ramassage

Autres spécifications :
Nombre de fils : 4
Nombre de fiches : 1
Nombre de bobine de ramassage : 2

Emballage inclus :
1x bobine de pulsar de ramassage

Remarque :
Le non-respect de ces instructions peut entraîner l'endommagement de la pièce ou d'autres composants de votre véhicule.
-En utilisant un petit fer à souder, soudez les fils à ceux-ci. sur votre faisceau électrique d'origine.
-Isolez vos soudures avec du thermorétractable.
-Avant de tenter de démarrer votre véhicule, un réglage de l'entrefer est nécessaire pour certains modèles.
-Faites tourner le volant à la main pour que le Le nœud surélevé est aligné avec la bobine de ramassage/pulsar et ajustez-le aussi près que possible, mais pas moins de 0,010 po.
-S'il n'y a pas d'étincelle ou d'étincelle irrégulière, changez les fils au niveau de la prise.

Expédition :
Livraison gratuite
Emplacement de l'article : entrepôt de Los Angeles, Californie
Délai de livraison : 3 à 7 jours ouvrables

Garantie :
1. État : 100 % neuf
2. Période de garantie : 1 an
3. Assistance 24 heures sur 24 : vous fournir une assistance après-vente en temps opportun



Customer Reviews

Based on 153 reviews
92%
(141)
6%
(9)
2%
(3)
0%
(0)
0%
(0)
M
Markus
Lichtmaschine +Regler+Dichtung

Alles passte bis auf das ,das Kabel des Reglers zu kurz war, habe es aber mit dem originalen einfach verlängert! Sonst Top für diesen Preis 👍

A
Anonymous
Perfect

My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue

d
domenico speranza

Everything is fine thank you

J
Jason P
Almost perfect

Part came in looking like the original and had plenty of wiring loom to make it from A to Z. I left the electrical box open so I could check for spark before putting it all back together, hit the start button and nothing, engine didnt even turn over so I started retracing my steps and found that the ground wires on the new stator had come out of their mounting eyelit because it was never crimped. No big deal, took a few minutes to fix and make a solid connection and then she turned over and I had spark. I will be taking it out on the water in the next 2 weeks to make sure all is running good.

A
Anonymous
Parts were correct and excellent condition.

Im not going to lie, I was skeptical about ordering this stator and flywheel but I ordered it Saturday morning and I received it Monday afternoon and parts were exactly what I needed and go my bike up and running and I'm super grateful. I was to excited to install them and I forgot to take a picture of the new stator and flywheel.

A
Angelo Testino

Everything was perfect!

K
Ki Walters
Just one problem

Part worked great and it had good quality. Only problem we ran into was that the stator wire was about 2 inches short. Splicing some in to extend it worked but it was a bit annoying.

S
Sebastian Tank
Funktioniert

Kabel vom Stator war zu kurz und musste verlängert werden.

Fünf Sterne für den Preis und die Funktionalität und maßhaltigkeit.