13-21 Honda CBR600RR/ABS Magneto Stator+Voltage Regulator Rectifier+Gasket
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator + Regulator + Gasket
Replacement Part Number:
Stator Assy: 31120-MJC-D01
Rectifier, regulator: 31600-MGZ-J01
Gasket, generator cover: 11321-MFJ-305
Fitment:
Fit for Honda CBR600RA AC 2013
Fit for Honda CBR600RA AC 2014
Fit for Honda CBR600RA AC 2015
Fit for Honda CBR600RA 7AC 2016
Fit for Honda CBR600RA 7AC 2017
Fit for Honda CBR600RA 7AC 2018
Fit for Honda CBR600RA 7AC 2019
Fit for Honda CBR600RA AC 2019
Fit for Honda CBR600RA 7AC 2020
Fit for Honda CBR600RA AC 2020
Fit for Honda CBR600RA 7AC 2021
Fit for Honda CBR600RR 2A 2013
Fit for Honda CBR600RR 3AC 2013
Fit for Honda CBR600RR 4A 2013
Fit for Honda CBR600RR 5AC 2013
Fit for Honda CBR600RR A 2013
Fit for Honda CBR600RR AC 2013
Fit for Honda CBR600RR 2A 2014
Fit for Honda CBR600RR 3AC 2014
Fit for Honda CBR600RR A 2014
Fit for Honda CBR600RR AC 2014
Fit for Honda CBR600RR A 2015
Fit for Honda CBR600RR AC 2015
Fit for Honda CBR600RR 6A 2016
Fit for Honda CBR600RR 7AC 2016
Fit for Honda CBR600RR 6A 2017
Fit for Honda CBR600RR 7AC 2017
Fit for Honda CBR600RR 6A 2018
Fit for Honda CBR600RR 7AC 2018
Fit for Honda CBR600RR 6A 2019
Fit for Honda CBR600RR 7AC 2019
Fit for Honda CBR600RR A 2019
Fit for Honda CBR600RR AC 2019
Fit for Honda CBR600RR 6A 2020
Fit for Honda CBR600RR 7AC 2020
Fit for Honda CBR600RR A 2020
Fit for Honda CBR600RR AC 2020
Fit for Honda CBR600RR 6A 2021
Fit for Honda CBR600RR 7AC 2021
Features:
Made of high grade magnetically conductive material to minimize the magnetic losses.
Computerized winding to optimize quality of copper wiring
Higher grade of electric components.
Dramatically improves reliability and durability comparing to stock units.
Best quality lead wires with insulation bring both enhanced abrasion and heat resistant.
Rectifier made of highest quality electro-conducting lamination materials.
Improved heat sink and charging capabilities.
Direct replacement to your original unit.
Plug-and-play, direct fit, instruction is NOT Included.
Package Includes:
1 x Stator Coil
1 x Regulator Rectifier
1 x Generator Gasket
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
| For TRIUMPH Fairing | |||
| Daytona 675 06-08 | Daytona 675 09-12 | Daytona 675 13-16 | Daytona 600/650 02-05 |
| For OTHER BRAND Fairing | |||
| Benelli Tornado Tre 1130 04-13 | MV AGUSTA F4 1000 05-06 | ||
SEARCH YOUR UNIQUE FAIRING
Customer Reviews
My stator volts were in the low 12s. Replaced this and they are around 14-14.2 at idle. It fixed my battery charging issue
Everything is fine thank you
Part came in looking like the original and had plenty of wiring loom to make it from A to Z. I left the electrical box open so I could check for spark before putting it all back together, hit the start button and nothing, engine didnt even turn over so I started retracing my steps and found that the ground wires on the new stator had come out of their mounting eyelit because it was never crimped. No big deal, took a few minutes to fix and make a solid connection and then she turned over and I had spark. I will be taking it out on the water in the next 2 weeks to make sure all is running good.
Im not going to lie, I was skeptical about ordering this stator and flywheel but I ordered it Saturday morning and I received it Monday afternoon and parts were exactly what I needed and go my bike up and running and I'm super grateful. I was to excited to install them and I forgot to take a picture of the new stator and flywheel.
Everything was perfect!
Part worked great and it had good quality. Only problem we ran into was that the stator wire was about 2 inches short. Splicing some in to extend it worked but it was a bit annoying.
Kabel vom Stator war zu kurz und musste verlängert werden.
Fünf Sterne für den Preis und die Funktionalität und maßhaltigkeit.
Excellent