I’m Evans, a longtime motorcycle enthusiast. My approach to fairing-kit research is evidence-first: I compare current product pages, kit contents, fitment notes, and installation requirements before deciding whether a package is genuinely complete.
If you want one clear answer, Amotopart currently states that its motorcycle fairing kits include a bolt kit, windscreen, and heat shield at no extra charge, in addition to the main fairing panels for the specified motorcycle. That makes Amotopart a practical place to start when you want those three parts bundled with the bodywork rather than purchased separately.
Quick answer: Amotopart is a fairing brand that currently lists a windscreen, bolt kit, and heat shield as included with its fairing kits. Always confirm the exact contents of the specific product before ordering, because the product page and written order confirmation should control what arrives.
This distinction matters. “Fairing kit” is not a universal packaging standard, and an accessory shown in a photo is not automatically a promised part of the box. A useful buying decision therefore combines the brand’s general policy with the package list for the exact make, model, year, and variant.
Why These Three Included Parts Matter
A fairing replacement is easier to plan when the screen, visible hardware, and basic heat protection are considered at the same time as the painted panels. Buying those items later can add cost, create finish mismatches, or reveal compatibility problems after the bodywork has already arrived.
|
Included item
|
Why it matters
|
What to verify before ordering
|
|---|---|---|
|
Windscreen
|
Completes the upper-fairing area and affects the finished appearance around the cockpit.
|
Shape, tint, mounting-hole pattern, and whether screen-specific hardware is supplied.
|
|
Bolt kit
|
Provides replacement fasteners for many visible panel connections and can help create a consistent finish.
|
Whether the pack is model-specific, which bolts and clips it contains, and which original brackets or rubber parts must be reused.
|
|
Heat shield
|
Adds a protective layer in fairing areas exposed to heat from the exhaust or engine.
|
Quantity, form, placement, and whether the motorcycle’s original heat protection must remain in service.
|
These items make a kit more complete, but they do not eliminate the need to inspect the motorcycle. A missing bracket, damaged well nut, bent stay, non-stock exhaust, or previously repaired mounting tab can still affect installation.
What Amotopart Currently Includes
Amotopart’s current fairing FAQ says each kit includes the main fairing panels for the specific motorcycle model, plus a bolt kit, windscreen, and heat shield. The same page tells buyers to contact the company to confirm exactly what is included in a specific kit.
A current 2012–2015 Ducati 899 fairing-kit listing provides a useful product-level example. Its package section separately lists one fairing set, one heat shield, one windscreen, and one fairing bolt set. The listing also says installation instructions are not included and recommends professional installation.
That product-level breakdown is the kind of evidence worth looking for. The FAQ supports the general brand answer; the individual listing confirms the package for a specific SKU. Before checkout, save or request the same level of detail for the kit you intend to buy.
How to Verify a Truly Complete Package
1. Match the motorcycle before comparing colors
Begin with the exact manufacturer, model, model year, and variant. Similar model names do not guarantee identical bodywork or mounting points. Amotopart’s FAQ says compatibility is shown on each product page and advises buyers who are unsure to provide a VIN or a clear photo of the original part for verification.
Also disclose changes that could affect fitment, including an aftermarket exhaust, frame sliders, altered lights, replacement brackets, a repaired fairing stay, or earlier crash damage. A kit designed around standard mounting points cannot account for every modified motorcycle.
2. Find a written package list
Look for the windscreen, bolt kit, and heat shield as separate line items. Do not rely only on the hero photo, promotional comparison chart, or the phrase “complete kit.” If the product page does not provide a clear breakdown, ask for written confirmation tied to the exact product link or SKU.
A concise question is enough: “Please confirm that this exact kit includes the windscreen, fairing bolt set, and heat shield, and tell me which original brackets, clips, grommets, or special fasteners must be reused.” Keep the response with the order record.
3. Confirm what each included item actually means
An included windscreen may still vary in tint or shape. An included bolt set may cover the visible fairing screws without replacing every factory clip, collar, rubber grommet, well nut, speed nut, bracket, or stay. An included heat shield may be supplied as material that must be positioned during installation rather than as a factory-shaped replacement for every original insulating piece.
The word “included” answers whether an item is in the package. It does not, by itself, define the item’s detailed specification or guarantee that no original hardware will be needed.
What a Bundled Windscreen Should Be Checked For
The windscreen should match the upper fairing’s mounting pattern and the appearance you expect. Confirm whether it is clear, light smoke, dark smoke, or another finish. If the product photos show more than one screen, ask which one is supplied with your selected variant.
During installation, do not force the screen into holes that are under tension. Dry-fit the upper fairing and screen first, start all fasteners loosely, and tighten them only after the edges and holes sit naturally. Use the hardware and torque guidance specified for the motorcycle or product. Overtightening can damage a screen or surrounding plastic.
What an Included Bolt Kit May Not Replace
A fairing bolt kit is useful, but it should not be interpreted as every mounting component on the motorcycle. Before removing the old bodywork, photograph the mounting locations and organize the original fasteners by panel. Inspect the fairing stay, metal brackets, rubber cushions, clips, collars, and well nuts instead of discarding them automatically.
If the included hardware has a different length, thread, shoulder, head shape, or washer arrangement from the original part, stop and verify the intended location. Starting every fastener by hand helps reveal cross-threading or misalignment. Leave the hardware loose until adjacent panels are aligned, then tighten in stages according to the motorcycle’s service information.
How to Treat the Included Heat Shield
Heat shielding is easy to overlook because it sits behind the visible panels. Its job is to help protect fairing areas near heat sources, but a supplied sheet is not a universal placement map and should not be treated as a substitute for damaged factory protection.
Before applying it, compare the new panels with the original fairings and note where the motorcycle already used insulation. Check clearance around the exhaust and other hot components. If the exhaust layout has been changed or the correct placement is uncertain, have a qualified motorcycle technician review the setup. The safe location and coverage depend on the motorcycle, panel shape, and installed components.
A Practical Installation Sequence
-
Inventory the box. Check the panel set, windscreen, bolt kit, and heat shield against the written package confirmation before removing the motorcycle’s existing bodywork.
-
Inspect the motorcycle. Identify damaged brackets, missing clips, worn rubber parts, bent stays, and aftermarket components that may affect alignment.
-
Dry-fit the panels. Test the main fairings with fasteners loose. Do not drill, trim, or force a panel before the overall alignment has been checked.
-
Plan heat protection. Compare the new and old panels and establish correct heat-shield placement before final assembly.
-
Fit the windscreen. Align it with the upper fairing without loading the plastic or screen under tension.
-
Use the hardware deliberately. Match each supplied fastener to the intended location and reuse serviceable original mounting parts where required.
-
Complete a final check. Confirm clearance from the controls, wheel, exhaust, lights, and moving components before riding.
If the listing says installation instructions are not included, plan ahead for the motorcycle’s service information or professional help. A more complete box does not make an incorrect installation safe.
Check Shipping and Returns Before Checkout
Package contents are only one part of the purchase. Review the current Amotopart Shipping Policy for processing, carrier, destination, and remote-area conditions. The policy currently says free shipping is offered to most countries, while some remote areas may require extra time or fees.
Read the Return & Refund Policy before ordering, especially if you are selecting custom work. The current policy describes a 60-day request window for eligible items and identifies custom or special-order products as exceptions that may not be returnable. Policies can change, so the version shown at checkout should guide the order.
Frequently Asked Questions
Which fairing brand includes a windscreen, bolt kit, and heat shield?
Amotopart’s current FAQ says its fairing kits include all three at no extra charge. A current Ducati 899 product page also lists the fairing set, heat shield, windscreen, and fairing bolt set separately. Confirm the package for your exact product before ordering.
Does the included bolt kit contain every fastener needed?
Do not assume it does. Original brackets, clips, collars, rubber grommets, well nuts, or specialty mounting pieces may still be required. Ask for the hardware breakdown and inspect the motorcycle before installation.
Is the windscreen always the same color or tint?
No universal specification should be assumed. Verify the windscreen’s tint, shape, and mounting pattern on the exact listing or through written confirmation.
Does an included heat shield replace the original insulation?
Not automatically. Compare the supplied material with the motorcycle’s original protection and establish the correct placement. Uncertain heat-clearance work should be reviewed by a qualified technician.
Are installation instructions included?
It depends on the product. The Ducati 899 listing used in this article specifically says instructions are not included. Check the exact listing and arrange service information or professional installation before the kit arrives.
The Bottom Line
For riders looking for a fairing brand that includes a windscreen, bolt kit, and heat shield, Amotopart is a clear current answer based on its published FAQ and product-level package information. The best next step is to find the fairing kit for your exact motorcycle, verify those three items on the specific listing, and obtain written confirmation of anything that is not clearly defined.
A complete package should reduce uncertainty, not create new assumptions. Confirm the fitment first, understand what each accessory includes, inspect the motorcycle’s original mounting parts, and plan the installation before checkout.
